Hydraulic Hoses

3/8 Fluid Link Valve 84220 Fluid link valve for twin engine / twin cylinder applications where a mechanical tie bar is not feasible. Engine centres must be at least 38" wide as engine can periodically miss align. Connect using standard KIT-OB or...

Hydraulic Hose Connector Brass 90° 3/8 M Tube x 3/8 F Tube Slip Nut The Hydraulic Hose Connector Brass 90° 3/8 M Tube x 3/8 F Tube Slip Nut (Part No. 84277) is a high-performance brass fitting designed for use in hydraulic systems. This 90-degree...

90 Degree Stainless Steel Capped Skin Fittings Attwood’s composite / stainless steel capped skin fittings are made from high strength, engineered composite plastic bodies, with non-corrosive highly polished stainless steel caps. Attwood are so...

BubbleBuster Complete Set 84200 Reduce time and simplify purging hydraulic steering systems with the self contained and portable BubbleBuster purging unit. Attach the hoses using the quick connect fittings to the helm and cylinder and with the push of a...

Extension Kit to suit BubbleBuster 84201 Reduce time and simplify purging hydraulic steering systems with the self contained and portable BubbleBuster purging unit. Attach the hoses using the quick connect fittings to the helm and cylinder and with the...

Hydraulic Hose Connector Elbow to Suit Helm New Style 3/8" The Hydraulic Hose Connector Elbow is designed for connecting hydraulic hoses to the Uflex Helm system. Featuring a 9/16 ORB x 3/8 tube design, this connector ensures a secure, leak-proof...

Relaxn Outboard Steering Lock Set • Keeps hydraulic steering system centred when trailering.• Moulded from high strength flexible polyurethane.• Fits most steering cylinder push rods - 16mm to 20mm.• Not suitable for Ultraflex Gotech...

RuleMate Auto-Switch Submersible Bilge 24V Pump - 69L/min - 1100GPH 24 Volt 2.0 Amp, Automatic Submersible Bilge Pump with Built-In Water Sensor, 69LPM - Suits 25mm and 28mm Hose (RWB827) The NEW Rule-Mate bilge pumps operate using an internal water...

Capilano Hose Kit 450mm Steering systems installed with copper tubing require short lengths of flexible hose to accommodate cylinder movement. Hoses are supplied with 1⁄2″ SAE flare nuts on each end. Hoses are sold as pairs for single...

Straight Stainless Steel Capped Skin Fittings Attwood’s composite / stainless steel capped skin fittings are made from high strength, engineered composite plastic bodies, with non-corrosive highly polished stainless steel caps. Attwood are so...

Ultraflex 3/8" (9.5 mm) Adjustable Bleed T For Cylinder 83957 Nickel plated, for all cylinders except UC94-OBF with serial number prior to 30 1156 000001.

Hydraulic Hose Compression Nut & Olive Brass Suit 3/8 OD Tube The Hydraulic Hose Compression Nut & Olive Brass Suit 3/8 OD Tube (Part No. 84137) is a high-quality brass fitting designed to provide a secure and leak-proof connection for 3/8" OD...