Raymarine AIS700 Class B with Splitter

The AIS700 from Raymarine is a Class B Automatic Identification System (AIS) transceiver designed for use with Raymarine multifunction navigation display systems.

As a Class B AIS transceiver, the AIS700 not only receives broadcasts from other vessels, it also transmits your own boat’s information too helping you to be seen on other vessels’ systems.

Features

• Full transmit and receive AIS for enhanced situational awareness and safety.
• Latest SO-TDMA networking for longer range and faster performance.
• Built-in antenna splitter simplifies installation with existing VHF radio antenna.
• NMEA2000, NMEA0183, PC and SeaTalkng Compatible.
• Software or hardware switchable Silent Mode for enhanced security when needed.

## Specifications##

Specifications

Environmental Specifications

• Operating temperature -15°C to +55°C
• Storage temperature -20°C to +75°C
• Water ingress IPX6 and IPX7
• Humidity Up to 93% @ 40°C

Power Specifications

• Power Supply 12v and 24 nominal
• Power Consumption <3W
• Peak current 3A
• Load Equivalency Number 1 LEN

RF Specifications

• DSC Receiver Implemented by time sharing with one TDMA receiver
• Receiver 1 band 156.025 MHz to 162.025 MHz (in 25KHz steps)
• Receiver 2 band 156.025 MHz to 162.025 MHz (in 25KHz steps)
• Transmitter band 156.025 MHz to 162.025 MHz (in 25KHz steps)
• Transmitter specification To meet IEC 62287-2 relevant sections
• Receiver specification To meet IEC 62287-2 relevant sections
• Transceiver specification To meet IEC 62287-2 relevant sections
• GPS receiver u-blox MAX-M8W
• GPS receiver channels 72 channels
• GPS Cold start acquisition time 26s nominal
• Positional source GPS & GLONASS
• AIS performance 5W SOTDMA

Antenna Specifications

• Operating frequency range 156.0MHz to 162.025MHz Transmitting / 156.0MHz to 174.0Mhz Receiving
• Insertion loss AIS RX path 0dB
• Insertion loss AIS TX path <1dB
• Insertion loss VHF RX path 0dB
• Insertion loss VHF TX path <1dB
• Power handling AIS port Maximum 5W input
• Power handling VHF port 25W input
• Switching time RX to VHF TX 10uS Max
• Switching time RX to AIS TX 10uS Max
• Switching time VHF TX to AIS TX 10uS Max
• Switching time any TX to RX 10uS Max
• VHF port impedance 50 Ohms
• AIS port impedance 50 Ohms
• Antenna port impedance 50 Ohms
• VHF to AIS port isolation >28dB (both directions)
• Minimum VHF input power for switching 400mW

External Connections

• VHF antenna connector type SO-239 co-axial
• VHF radio connector type SO-239 co-axial
• GNSS antenna connector 50Ω TNC co-axial
• NMEA2000 DeviceNet male
• USB Micro-B
• External interface isolation NMEA0183 and NMEA 2000 interfaces to incorporate galvanic isolation from power supply as required by the relevant interface specification.
• NMEA0183 interface 1 (MFD connection) NMEA 0183 HS (IEC 61162-1) compliant, bi-directional, RS422 levels. 4 wire interface (differential signalling). Configurable baud rate. Input to MFD from AIS.
• NMEA0183 interface 2 (NMEA0183 instrument connection) NMEA 0183 (IEC 61162-1) compliant, bi-directional, RS422 levels. 4 wire interface (differential signalling). 4 wire interface (differential signalling) Configurable baud rate.
• USB interface (PC connection) Protocol NMEA 0183 HS (IEC 61162-1) compliant, bi-directional USB port, 38.4 kBaud.

## Specifications##

## In the Box##

In The Box

1. AIS700 Class B AIS Transceiver with built-in VHF antenna splitter
2. GNSS (GPS) Antenna
3. Power / data cable 2m (6.56 ft)
4. VHF Radio cable 1m (3.28 ft)
5. DeviceNet to SeaTalkng® adaptor cable 1m (3.28 ft)
6. GNSS antenna gasket
7. GNSS antenna pole mount
8. Unit fixings (4 x No.8x19 self tapping screws)
9. M5 nut and washer (grounding)
10. Documentation kit
11. GNSS antenna fixings (3 x M3x40 stud and thumb nut)
12. Software CD

## In the Box##