Description

Fusion Signature Series Marine Amplifiers

24-Volt Signature Series 6 Channel 1500-Watt Marine Amplifier

Purpose-built for the marine environment, the Signature Series marine amplifiers feature some of the most impressive environmental protection available — delivering a Signature performance out on the water.

Class-D amplifier design delivers higher efficiency and greater output.
Connect up to two speakers per channel at 2 ohms, or bridge two channels at 4 ohms for increased power.
Conformal coated PCBs provide extra protection from the marine elements.
Rigid aluminium alloy heat sink is moulded for greater dissipation of heat.
The amplifiers are available in monoblock, 4-channel, 5-channel, 6-channel and 8-channel configurations.
Engineered to last season after season, the amplifiers include a supported 3-year warranty.

Designed and Engineered to True Marine Standards: Built on the True-Marine design philosophy from Fusion^®, the Signature Series amplifiers have been tested to a high level of protection against salt fog, temperature, vibration and UV.

Class-D Amplifier Technology: The highly efficient Class-D design provides lower battery drain with a higher output than Class-AB amplifiers. This delivers increased power to the connected speakers/subwoofers for a whole new level of audio performance.

Superior System Performance: The Signature Series amplifiers feature built-in variable bass boost, a subsonic filter and variable low/high pass crossover filters for superior performance and enhanced system protection.

Marine-ready design with conformal coated PCBS: Helping to extend the life of your amplifiers, the Signature Series amplifiers are designed with conformal coated PCBs to provide extra protection from the marine elements.

Rigid aluminium alloy heat sink: For increased efficiency, the rigid aluminium alloy heat sink is moulded to form a singular die-cast chassis. The fin layout is calculated with precision to increase the surface area of the heat sink and improve heat dissipation.

Stainless-steel mirror finish: The polished stainless-steel control panel cover conceals and helps protect all cable connections and settings controls while providing an attractive finish to complement any installation.

##Features##

Features

Six-channel 24 V marine-ready amplifier
1500 W peak output for bigger systems
User-adjustable 0–9 dB bass boost
32–320 Hz variable crossover control
Conformal coated PCB for harsh conditions
Backed by a solid 3-year warranty

##Features##

##Specifications##

Specifications

Brand: Fusion
Series: Signature Series
Application: Marine amplifier
Channels: 6-channel (24 V model)
Peak power: 1500 W
Amplifier class: Class D
Operating voltage (24 V model): 21.6–32 VDC
RMS power @ 4 Ohm, 28.8 V: 100 W x 6
RMS power @ 2 Ohm, 28.8 V: 140 W x 6
Frequency response (24 V 6-channel): 10 Hz–40 kHz (-3 dB @ 4 Ohm rated power)
Input sensitivity @ RCA: 0.3–8 V RMS (user adjustable)
Input impedance: 7 kΩ nominal (24 V 6-channel)
Current consumption (standby, 24 V): < 1 mA @ 28.8 V input
Current consumption (idle, 24 V): < 1.25 A @ 28.8 V input
Current consumption (max, 24 V 6-channel): 35 A
Fuse rating (24 V 6-channel): 3 x 20 A ATC blade-type (SAE J1171 compliant)
Minimum copper power/ground wire gauge: 1 AWG
Physical height: 210 mm (8.27")
Physical width (6-channel): 420 mm (16.54")
Physical depth (6-channel): 57 mm (2.24")
Weight (6-channel / 6-channel 24 V): 5.3 kg (11.68 lbs)
Operating temperature range: 0° to 50° C (32° to 122° F)
Warranty: 3 years
High-pass/low-pass full range filter: Yes (user selectable)
HP variable crossover (6-channel): 32–320 Hz
LP variable crossover (6-channel): 32–320 Hz
Bass boost: 0–9 dB, user adjustable (zone 3 only)
PCB protection: Conformal coated PCBs
Chassis: Rigid aluminium alloy heat sink, die-cast
Finish: Polished stainless-steel control panel cover
Environmental protection: Tested against salt fog, temperature, vibration and UV
Design standard: Built to Fusion True-Marine philosophy