Description

JL Audio XDM Car And Marine Amplifier, Monoblock, 600W - XDM600/1

Monoblock Class D Car/Marine Subwoofer Amplifier, 600 W x 1 @ 2 Ω / 400 W x 1 @ 4 Ω - 14.4V

With NexD technology, XDM amplifiers achieve total amplifier efficiencies exceeding 80%. This results in reduced energy use, making them much kinder to your electrical system.

MULTIPLE CONFIGURATIONS TO FIT NEARLY ANYWHERE

EXCLUSIVE INPUT FILTER FOR AMAZING AUDIO ON LAND OR SEA

EFFICIENT DESIGN FOR HIGH OUTPUT USES LESS ENERGY

FULL SUITE OF STUDIO-GRADE SIGNAL PROCESSING ON BOARD

UNIQUE DESIGN ADJUSTS OPERATION TO AVOID THERMAL EVENTS

2-YEAR WARRANTY

FIDELITY FOR ALL
Our exclusive dual-mode input filter and differential-balanced inputs result in outstanding noise rejection and crystal-clear audio performance in boats or cars.

EQUIPPED WITH NexD
Advanced switching technology for exceptional efficiency reduces current draw and heat, permitting reliable high-power output from a compact and easy-to-install chassis.

STUDIO-GRADE SIGNAL PROCESSING
Beneath every XDM amplifier’s sealed security cover, you’ll find audiophile-grade signal processing with fully variable filters and calibrated potentiometers.

ADVANCED ROLLBACK PROTECTION
Innovative circuit design ensures the amplifier will never shut down due to thermal overload and keeps the music playing, even under the most demanding conditions.

AUTO TURN-ON CAPABILITIES
Choose from 3 options: auto signal sensing with +12-volt remote out; auto DC-offset sensing with +12-volt remote out; or conventional +12 volt turn-on lead.

BUILT TOUGH
The all-aluminium, powder-coated housing inhibits corrosion, and a sealed security cover protects controls from the elements.

CHOOSE YOUR MODEL

FULL-RANGE STEREO
These amplifiers are available in 2, 4, 6 and 8 channel variants.

SYSTEM AMPLIFIERS
There are 3 models to power a whole system with 2 or 4 full-range outputs plus a subwoofer output.

MONOBLOCK
Three models are available with 300, 600 and 1000 watts.

24-VOLT OPTIONS
These amplifiers are available in 6 and 8 channel variants.

##Features##

Features

600 W RMS into 2 Ω load
NexD Class D design saves battery
52 mm low profile for hidden mounts
Powder coated aluminium case resists corrosion
Onboard 50–500 Hz low pass crossover
Ready for HD-RLC or MHD-RLC remote

##Features##

##Specifications##

Specifications

Type: Monoblock car and marine subwoofer amplifier (600 W)
Amplifier class: Class D
Rated continuous power @ 14.4 V, 4 Ω: 400 W x 1
Rated continuous power @ 14.4 V, 2 Ω: 600 W x 1
Rated continuous power @ 12.5 V, 4 Ω: 300 W x 1
Rated continuous power @ 12.5 V, 2 Ω: 500 W x 1
Frequency response (+0, -1 dB): 7 Hz – 500 Hz
Signal-to-noise ratio (analog inputs, A-weighted, 20 Hz – 20 kHz): > 87 dB (referred to highest rated power)
Signal-to-noise ratio (analog inputs, A-weighted, 20 Hz – 20 kHz): > 67 dB (referred to 1 W)
Damping factor @ 4 Ω: > 1000 @ 50 Hz
Damping factor @ 2 Ω: > 500 @ 50 Hz
THD+N @ rated power: <1% @ 2 Ω
Input voltage range @ RCA inputs: 200 mV – 4 V RMS
Filter modes (channels 1 & 2): Off or Low‑Pass only
Filter slope (channels 1 & 2): 12/24 dB/octave
Filter frequency range (channels 1 & 2): 50 Hz – 500 Hz
Infrasonic filter (subwoofer channel): 30 Hz, defeatable
Pass‑through preamp output: Buffered
Remote level control compatibility: Optional HD‑RLC or MHD‑RLC (water‑resistant)
Operating voltage (12 V models): 11 – 14.5 VDC
Physical height: 52 mm
Physical width: 216 mm
Physical depth: 180 mm
Weight: 2.86 kg
Fuse rating: 50 A
Recommended fuse type(s): AFS, AGU or MaxiFuse™
Minimum copper power/ground wire gauge: 4 AWG
Housing material: All‑aluminium, powder‑coated
Warranty: 2 years
Technology: NexD switching design
Efficiency: Total amplifier efficiency exceeding 80%